Computer Recap

First of all before we start talking about how we put everything together, I think you should know the top 6  components of a computer.
1) Mother Board
2) Hard Drive
3) Ram
4) CPU
5) Power Supply
6) Case

Assembling:
1) First we placed the mother board inside the case and attached it firmly with screws.
2) We inserted the CPU into a small slot with a lid in the mother board.
3) We attached the fan near the mother board on the side with screws.
4) Attach the Hard Drive and Power supply near the front of the computer.
5) Put all the wires in the slots they fit in. You will know where to put them as they are marked with either numbers/letters and colors.
6) Only put one Ram in the mother board.
7) Do a smoke test with the computer. If the computer works and doesn't smoke or make any beeping noises then continue.
8) Then attach the disk drive.
9) Try the smoke test with more Ram this time. If it worked continue.
10) Attach the case with screws and install a software.